LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System - Manual >> Repair Instructions >> Mode Control Cam Replacement >> Removal Procedure

Removal Procedure

  1. Remove the instrument panel assembly. Refer to Instrument Panel Assembly Replacement
  2. Remove the instrument panel wiring harness (2) from the instrument panel tie bar (1).
    Fig 1: Instrument Panel Wiring Harness And Instrument Panel Tie Bar
    GM2027818Courtesy of GENERAL MOTORS COMPANY

    Disconnect the electrical connectors.

  3. Remove the instrument panel tie bar (2).
    Fig 2: Instrument Panel Tie Bar, Bolts And Nuts
    GM2027821Courtesy of GENERAL MOTORS COMPANY
    • Remove the 4 instrument panel tie bar bolts (3, 4).
    • Remove the 2 instrument panel tie bar nuts (1).
  4. Remove the mode control cam (1).
    Fig 3: Mode Control Cam
    GM2027962Courtesy of GENERAL MOTORS COMPANY