LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System - Manual >> Repair Instructions >> Mode Control Cam Replacement >> Installation Procedure

Installation Procedure

  1. Install the mode control cam (1).
    Fig 1: Mode Control Cam
    GM2027962Courtesy of GENERAL MOTORS COMPANY
    NOTE: The mode control cam can only be fitted in one position.
  2. Install the instrument panel tie bar (2).
    Fig 2: Instrument Panel Tie Bar, Bolts And Nuts
    GM2027821Courtesy of GENERAL MOTORS COMPANY
    CAUTION: Refer to Fastener Caution
    • Install the 4 instrument panel tie bar bolts (3, 4) and tighten to 19 N.m (17 lb ft).
    • Install the 2 instrument panel tie bar nuts (1) and tighten to 9 N.m (80 lb in).
  3. Install the instrument panel wiring harness (2) from the instrument panel tie bar (1).
    Fig 3: Instrument Panel Wiring Harness And Instrument Panel Tie Bar
    GM2027818Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connectors.

  4. Install the instrument panel assembly. Refer to Instrument Panel Assembly Replacement .
scientia non olet · About LEMON Manuals