Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
- Disconnect the wiring harness plug (2).
- Disconnect the positive crankcase ventilation pipe (1).
- Place collecting basin underneath.
- Disconnect the throttle body heater outlet pipe (4).
- Disconnect the throttle body heater inlet pipe (3).
- Remove the 4 throttle body bolts (2).
- Remove the throttle body (1).
- Remove and DISCARD the throttle body gasket.