LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L (LUZ) Diesel) >> Repair Instructions - On Vehicle >> Timing Belt Tensioner Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Open the hood.
  2. Remove the timing belt. Refer to Timing Belt Replacement (New Belt)  and Timing Belt Replacement (Used Belt) .
  3. Remove the timing belt tensioner. Refer to Timing Belt Tensioner Replacement .
  4. Remove the timing belt idler pulley - lower. Refer to Timing Belt Idler Pulley Replacement - Lower .
  5. Remove the timing belt tensioner bracket bolt (2).
    Fig 1: Timing Belt Tensioner Bracket
    GM2190699Courtesy of GENERAL MOTORS COMPANY
  6. Remove the timing belt tensioner bracket (1).
scientia non olet · About LEMON Manuals