LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L (LUZ) Diesel) >> Repair Instructions - On Vehicle >> Oil Level Indicator Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
WARNING: While engine is operating, the exhaust system will become extremely hot. To prevent burns avoid contacting a hot exhaust system.
  1. Open the hood.
  2. Remove the catalytic converter. Refer to Catalytic Converter Replacement (2.0L Diesel LUZ) .
  3. Remove the 2 oil level indicator tube bolts (2).
    Fig 1: Oil Level Indicator Tube And Bolts
    GM2190564Courtesy of GENERAL MOTORS COMPANY
  4. Remove the oil level indicator tube (1).
scientia non olet · About LEMON Manuals