LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L (LUZ) Diesel) >> Repair Instructions - On Vehicle >> Exhaust Camshaft Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the camshaft housing. Refer to Camshaft Housing Replacement .
  2. Install the EN-46789  locking tool.
  3. Remove and DISCARD the exhaust camshaft sprocket bolt (2).
    Fig 1: Identifying Exhaust Camshaft Sprocket Bolt
    GM2026779Courtesy of GENERAL MOTORS COMPANY
  4. Remove the exhaust camshaft sprocket (1).
  5. Remove the EN-46789  locking tool.
  6. Remove the exhaust camshaft seal ring (1).
    Fig 2: Identifying Exhaust Camshaft Seal Ring
    GM2026777Courtesy of GENERAL MOTORS COMPANY
  7. Remove the exhaust camshaft (2).
scientia non olet · About LEMON Manuals