LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L (LUZ) Diesel) >> Repair Instructions - On Vehicle >> Belt Idler Pulley Replacement - Engine Mount Side >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the belt idler pulley (2).
    Fig 1: Identifying Belt Idler Pulley
    GM2192272Courtesy of GENERAL MOTORS COMPANY
  2. Install the belt idler pulley bolt (1) and tighten to 25 N.m (18 lb ft).
    CAUTION: Refer to Fastener Caution .
  3. Install the generator, air conditioning compressor and power steering pump belt. Refer to Generator, Air Conditioning Compressor and Power Steering Pump Belt Replacement .