LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L (LUZ) Diesel) >> Repair Instructions - Off Vehicle >> Heated Oxygen Sensor Installation

Heated Oxygen Sensor Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: Heated Oxygen Sensor
GM2026555Courtesy of GENERAL MOTORS COMPANY
CAUTION: Refer to Fastener Caution .
NOTE:
  • Clean thread before install the heated oxygen sensor.
  • Use assembly paste for install the heated oxygen sensor.

Install the heated oxygen sensor (1) and tighten to 45 N.m (33 lb ft).