LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L (LUZ) Diesel) >> Repair Instructions - Off Vehicle >> Exhaust Pressure Sensor Pipe Installation

Exhaust Pressure Sensor Pipe Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the exhaust pressure sensor pipe (5)
    Fig 1: Clamps
    GM2966396Courtesy of GENERAL MOTORS COMPANY
  2. Install the bolts (3, 6, 7) and tighten to 9 N.m (80 lb in).
    CAUTION: Refer to Fastener Caution .
  3. Install the 2 hoses (4) to the exhaust pressure sensor (1)
  4. Install the clamps (2).
scientia non olet · About LEMON Manuals