LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L (LUZ) Diesel) >> Repair Instructions - Off Vehicle >> Exhaust Pressure Sensor Installation

Exhaust Pressure Sensor Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the exhaust pressure sensor (2) to the bracket.
    Fig 1: Exhaust Pressure Sensor
    GM2966398Courtesy of GENERAL MOTORS COMPANY
  2. Install the nut (1) and tighten to 8 N.m (70 lb in).
    CAUTION: Refer to Fastener Caution .
  3. Install the 2 hoses (3) to the exhaust pressure sensor (2).
  4. Install the clamps (4).