LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Mechanical - 2.0L (LUZ) Diesel) >> Repair Instructions - Off Vehicle >> Crankshaft Pulley Installation

Crankshaft Pulley Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the crankshaft pulley (1).
    Fig 1: Crankshaft Pulley
    GM2026736Courtesy of GENERAL MOTORS COMPANY
  2. Install the 4 crankshaft pulley bolts (2) and tighten to 25 N.m (18 lb ft) use a wrench to hold the crankshaft.
    CAUTION: Refer to Fastener Caution .