Inspection Procedure
WARNING: This page is about a different variant/trim than selected.
- Inspect each camshaft cover for the dents or damage to the exterior. A dented or damaged camshaft cover may:
- Leak engine oil.
- Affect crankcase ventilation.
- Interfere with the camshafts.
- Interfere with the ignition coil sealing.
- Allow water or condensation to enter the engine.
- Inspect the exterior of the camshaft cover for the following conditions:
- Damage to the camshaft cover bolt holes (1 and 2).
- Damage to the camshaft sensor mounting hole (3).
- Damage to the under pressure hose bracket bolt holes (4).
- Inspect the interior of the camshaft cover for the following conditions:
- Inspect the camshaft cover bolt holes (3 and 4).
- Inspect the camshaft cover for cracks, casting imperfections or damage (1, 2 and 5).