LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls And Fuel - 2.0L (LUZ) Diesel - Repair Instructions) >> Repair Instructions >> Fuel Feed Hose Protector Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Open the hood.
  2. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .
  3. Remove the engine lift bracket bolt (1).
    Fig 1: Engine Lift Bracket And Bolt
    GM2189689Courtesy of GENERAL MOTORS COMPANY
  4. Remove the engine lift bracket (2).
  5. Remove the 2 fuel feed hose protector bolts (4).
  6. Remove the fuel feed hose protector (3).
scientia non olet · About LEMON Manuals