Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.

Ignition On, observe the DTC information with a scan tool. DTC UXXXX should not be set.
- If a DTC is set
  Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If no DTC is set
Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
Verify a DTC does not set.
- If any DTC sets
  Refer to Circuit/System Testing .
- If a DTCs does not set
All OK.