Static Test
WARNING: This page is about a different variant/trim than selected.
- Inspect the valve body assembly for a stuck valve, debris or damage. Refer to Control Solenoid Valve Inspection .
- If a stuck open or closed valve is found
Replace the valve body assembly.
- If no stuck open or closed valve is found
- If a stuck open or closed valve is found
- Inspect the torque converter assembly for damage or discoloration.
- If a torque converter assembly defect is found
Replace the torque converter assembly as necessary.
- If the torque converter assembly OK
Replace the K71 Transmission Control Module.
- If a torque converter assembly defect is found