Driver or Passenger Seat Back Heater Replacement

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Driver Or Passenger Seat Back Cushion Heater

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Refer to SIR Warning . Preliminary Procedure Remove the driver or passenger seat. Refer to Driver or Passenger Seat Removal and Installation . Remove the driver or passenger seat back cushion cover and pad. Refer to Driver or Passenger Seat Back Cover and Pad Replacement .
1	Driver or Passenger Seat Back Cushion Cover Procedure Separate the seat back cushion cover from the seat cushion pad.
2	Driver or Passenger Seat Back Cushion Heater Procedure Disconnect the electrical connector. Heater is a integral part of the seat back cushion pad. The pad and heater should be replaced as a assembly.
3	Driver or Passenger Seat Back Cushion Pad