Front Side Door Weatherstrip Replacement - Door Side

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Side Door Weatherstrip - Door Side

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Front Side Door Weatherstrip Procedure Open the front side door to the fully open position. Remove the front side door check link bolt from the body side only . Refer to Front Side Door Check Replacement . Use a suitable tool, remove the push-in retainer from around the door. Ensure that the weatherstrip is fully seated in the door frame retainer. Verify proper door operation. NOTE: Water test the door area after replacing the door weatherstrip to ensure no leaks.

Callout

Component Name

Front Side Door Weatherstrip

Procedure

Open the front side door to the fully open position.
Remove the front side door check link bolt from the body side only . Refer to Front Side Door Check Replacement .
Use a suitable tool, remove the push-in retainer from around the door.
Ensure that the weatherstrip is fully seated in the door frame retainer.
Verify proper door operation.

NOTE:

Water test the door area after replacing the door weatherstrip to ensure no leaks.