Front Side Door Upper Hinge and Lower Hinge Replacement

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Side Door Hinges

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Front Side Door Upper Hinge to Body Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Procedures Before removing the door, apply a double layer of masking tape around the perimeter of the painted surfaces. Mark the location of the hinge being removed. Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement (Trax)Front Wheelhouse Liner Replacement (Encore) . Support the door before removing the hinge bolts. Tighten 32 N.m (24 lb ft)
2	Front Side Door Upper Hinge to Door Bolt (Qty: 2) Tighten 25 N.m (18 lb ft)
3	Front Side Door Upper Hinge
4	Front Side Door Lower Hinge to Body Bolt (Qty: 2) Tighten 32 N.m (24 lb ft)
5	Front Side Door Lower Hinge to Door Bolt (Qty: 2) Tighten 25 N.m (18 lb ft)
6	Front Side Door Lower Hinge Procedure If the door striker needs adjust. Refer to Front Side Door Lock Striker Adjustment .