Engine Front Cover and Oil Pump Installation: Notes

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools

EN-952 Fixing Pin
EN-953-A Fixing Tool
EN-49977-100 Transmitter Disc Fixation
EN-49977-200 Fixing Tool

For equivalent regional tools, refer to Special Tools .

Fig 1: M6, M10 Front Cover Bolts And Engine Front Cover

Courtesy of GENERAL MOTORS COMPANY

NOTE:

Mind the guide sleeves when installing engine front cover.

Install the engine front cover (3).
Install the 13 engine front cover bolts M6 (1).
Install the 2 engine front cover bolts M10 (2).

CAUTION:

Refer to Fastener Caution .

Tighten the 13 engine front cover bolts M6 to 8 N.m (71 lb in).
Tighten the 2 engine front cover bolts M10 to 35 N.m (26 lb ft).