Front Floor Console Replacement (Trax)
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS COMPANY
| Callout |
Component Name |
|
Preliminary Procedures
- Remove both front floor console extension panels. Refer to Front Floor Console Extension Replacement - Left Side , and Front Floor Console Extension Replacement - Right Side .
- Remove the front floor console trim plate. Refer to Front Floor Console Trim Plate Replacement (Trax) .
|
| 1 |
Front Floor Console Fasteners (Qty: 8)
Procedures
- Position seats as necessary to access hole covers and fasteners.
- Use a flat bladed plastic trim tool to open the front floor console bolt access hole cover to access the fasteners from the rear of the floor console.
Tighten
2.5 N.m (22 lb in) |
| 2 |
Front Floor Console Procedures
- Disconnect electrical connections.
- Apply the parking brake.
- Place the transmission shift control rearward.
- With the aid of an assistant lift the floor console forward and over the park brake handle and away from the instrument panel assembly.
|