Removal Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (Trax)Front Bumper Fascia Replacement (Encore) .
Disconnect the intake air pressure and temperature sensor electrical connector.

Fig 1: Charge Air Cooler Outlet Air Hose, Throttle Body & Clamp

Courtesy of GENERAL MOTORS COMPANY

Loosen the clamp (1) at the charge air cooler outlet pipe (2) to throttle body (3).

Fig 2: Charge Air Cooler Outlet Air Pipe To Frame Bracket

Courtesy of GENERAL MOTORS COMPANY

Remove the fasteners (1) from the charge air cooler outlet air pipe to frame bracket (2).

Fig 3: Charge Air Cooler, Outlet Air Hose & Retainer Spring

Courtesy of GENERAL MOTORS COMPANY

Unclip the retainer spring (1).
Remove the charge air cooler outlet air hose (2) from the charge air cooler (3).