Removal Procedure
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front floor console. Refer to Front Floor Console Replacement (Encore)Front Floor Console Replacement (Trax) .
- Ensure that the parking brake lever is in the fully released position.
- Disconnect the electrical connector from the parking brake indicator switch.
- Using ONLY HAND TOOLS, remove the adjusting nut (1) from the front cable threaded rod.
- Remove the parking brake lever mounting nuts (1).
- While removing the front cable threaded rod from the parking brake lever assembly, remove the parking brake lever assembly from the vehicle.