LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Parking Brake System) >> Repair Instructions >> Parking Brake Indicator Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front floor console assembly. Refer to Front Floor Console Replacement (Encore)Front Floor Console Replacement (Trax) .
  2. Ensure that the park brake lever is in the fully released position.
  3. Disconnect the electrical connector from the parking brake indicator switch.
  4. Fig 1: Parking Brake Indicator Switch Bolt
    GM2512998Courtesy of GENERAL MOTORS COMPANY
  5. Remove the parking brake indicator switch bolt (1).
  6. Fig 2: Parking Brake Indicator Switch
    GM2512999Courtesy of GENERAL MOTORS COMPANY
  7. Remove the parking brake indicator switch (1).