Installation Procedure
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Install the parking brake indicator switch (1).
- Install the parking brake indicator switch bolt (1) and tighten to 2 N.m (18 lb in).
- Connect the electrical connector to the parking brake indicator switch.
- Install the front floor console assembly. Refer to Front Floor Console Replacement (Encore)Front Floor Console Replacement (Trax) .
CAUTION:
Refer to Fastener Caution .