Installation Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Transmission Range Selector Lever

Courtesy of GENERAL MOTORS COMPANY

WARNING:

Hold the transmission range selector lever while removing or installing the lever retaining nut. Failure to hold the lever can cause damage to the transmission internal park system components which could allow the vehicle to roll when placed in the park position.

Install the transmission range selector lever (2).

CAUTION:

Refer to Fastener Caution .

Install the transmission range selector lever nut (1) and tighten to 30 N.m (22 lb ft).

Fig 2: Automatic Transmission Range Selector Lever Cable Terminal & Shift Lever Pin

Courtesy of GENERAL MOTORS COMPANY

Install the transmission range selector lever cable (2) to the cable bracket.
Connect the transmission range selector lever cable terminal (1) to the transmission manual shift lever pin.
Check the range selector cable adjustment. Refer to Range Selector Lever Cable Adjustment .