Range Selector Lever Cable Adjustment
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Set the park brake and chock the wheels.
- Verify the transmission range select lever is in the park position.
- Verify the transmission manual shift lever is in the park position.
- Release the range select cable adjuster clip (1).
- Depress the adjuster clip (1) locking the adjuster clip completely.
- Ensure the cable tube (2) is secure.
- Check the transmission range select lever in all gear selections for proper operation.
NOTE:
Adjust the automatic transmission range selector cable while the transmission and the gear selector are in the Park position only. Failure to do so may cause mis-adjustment.