Rear Seat Back Cushion Cover and Pad Replacement (60%)

WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Seat Back Cushion Cover And Pad (60%)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear seat back cushion. Refer to Rear Seat Back Cushion Removal and Installation (60%) . Remove the rear seat head restraint guide. Refer to Rear Seat Head Restraint Guide Replacement . Remove the rear seat back cushion latch release knob bezel. Refer to Rear Seat Back Cushion Latch Release Handle Bezel Replacement . Remove the child seat back bracket access hole cover. Refer to Child Seat Bracket Access Hole Cover Replacement . Remove the rear seat back cushion pivot support. Refer to Rear Seat Back Cushion Pivot Support Replacement . Remove the rear seat belt opening bezel, if equipped. Refer to Rear Seat Belt Opening Bezel Replacement . Remove the rear seat armrest. Refer to Rear Seat Armrest Replacement .
1	Rear Seat Back Cushion Cover Procedure Remove the rear seat center head restraint, if equipped. Disengage the J-channel retainers from the seat back cushion frame. Remove the hog rings from the under side of the rear seat back cushion cover. Pull the cover away from the pad to disengage the hook and loop retainers. If replacing the seat back panel, transfer components as necessary. NOTE: When installing the rear seat back cushion cover, pull the cover tightly in all corners to ensure that no creasing occurs.
2	Rear Seat Back Cushion Pad

Callout

Component Name

Preliminary Procedure

Remove the rear seat back cushion. Refer to Rear Seat Back Cushion Removal and Installation (60%) .
Remove the rear seat head restraint guide. Refer to Rear Seat Head Restraint Guide Replacement .
Remove the rear seat back cushion latch release knob bezel. Refer to Rear Seat Back Cushion Latch Release Handle Bezel Replacement .
Remove the child seat back bracket access hole cover. Refer to Child Seat Bracket Access Hole Cover Replacement .
Remove the rear seat back cushion pivot support. Refer to Rear Seat Back Cushion Pivot Support Replacement .
Remove the rear seat belt opening bezel, if equipped. Refer to Rear Seat Belt Opening Bezel Replacement .
Remove the rear seat armrest. Refer to Rear Seat Armrest Replacement .

Rear Seat Back Cushion Cover

Procedure

Remove the rear seat center head restraint, if equipped.
Disengage the J-channel retainers from the seat back cushion frame.
Remove the hog rings from the under side of the rear seat back cushion cover.
Pull the cover away from the pad to disengage the hook and loop retainers.
If replacing the seat back panel, transfer components as necessary.

NOTE:

When installing the rear seat back cushion cover, pull the cover tightly in all corners to ensure that no creasing occurs.

Rear Seat Back Cushion Pad