Rear Seat Back Cushion Pivot Support Replacement
WARNING: This page is about a different car, the 2015 Chevrolet Trax and 2015 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the rear seat back cushion. Refer to Rear Seat Back Cushion Removal and Installation (40%) Rear Seat Back Cushion Removal and Installation (60%) |
|
| 1 | Rear Seat Back Outer Pivot Bolt
CAUTION:
Refer to Fastener Caution . Tighten 23 N.m (17 lb ft) |
| 2 | Rear Seat Back Cushion Outer Pivot Bushing |
| 3 | Rear Seat Back Cushion Outer Pivot Bolt Spring |
| 4 | Rear Seat Back Cushion Pivot Support Housing |
| 5 | Rear Seat Back Center Finish Cover |