Removal Procedure
- Open the hood.
- Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
- Open the 2 positive crankcase ventilation pipe retainer clips (2) and (3).
- Remove the positive crankcase ventilation pipe from the intake manifold.NOTE: Move retainer clamp (1) in direction of the arrow.
- Loosen the charger air bypass valve pipe clamp (3).
- Remove the charger air bypass valve pipe from turbocharger.
- Remove the charger air bypass valve pipe (2) from turbo charger wastegate regulator solenoid valve.
- Disconnect the positive crankcase ventilation pipe from turbocharger.
- Unclip and remove the positive crankcase ventilation pipe assembly (1) from the camshaft cover retainer clips.