Engine Mount Inspection
- Install the engine support fixture. Refer to Engine Support Fixture .
- Observe the engine mount while raising the engine. Raising the engine removes the weight from the engine mount and creates slight tension on the rubber.
- Replace the engine mount if the engine mount exhibits any of the following conditions:
- The hard rubber is covered with heat check cracks.
- The rubber is separated from the metal plate of the engine mount.
- The rubber is split through the center of the engine mount.
- For engine mount replacement, refer to Engine Mount Replacement - Right Side .
- For rear transmission mount replacement, refer to:
- For left transmission mount replacement, refer to: