LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Engine Oil Cooler Outlet Hose Replacement (1.4L LUV, 1.8L LUW and LWE) >> Removal Procedure

Removal Procedure

  1. Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection
  2. Drain engine coolant. Refer to Cooling System Draining and Filling (GE-47716 Fill)  and Cooling System Draining and Filling (Static Fill) 
  3. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement
  4. Remove the oil cooler outlet hose clamp (2).
    Fig 1: Thermostat Housing And Oil Cooler Outlet Hose
    GM2371623Courtesy of GENERAL MOTORS COMPANY
  5. Remove the oil cooler outlet hose (3) from the thermostat housing (1).
  6. Remove the warm up three way catalytic converter. Refer to Warm Up Three-Way Catalytic Converter Replacement
  7. Remove the oil cooler outlet pipe bolt (1) from the engine block.
    Fig 2: Oil Cooler Outlet Pipe
    GM2371625Courtesy of GENERAL MOTORS COMPANY
  8. Remove the oil cooler outlet pipe (2) in compound with the oil cooler outlet hose.
  9. Remove the oil cooler outlet hose clamp.
  10. Remove the oil cooler outlet hose from the oil cooler outlet pipe.
scientia non olet · About LEMON Manuals