Circuit/System Verification
- Ignition ON.
- Verify that DTC P0480, P0691 or P0692, is not set.
- If a DTC is set
Refer to DTC P0480, P0691 or P0692 (LUZ) .
- If no DTC is set.
- If a DTC is set
- Verify the G10 Cooling Fan Motor activates and increases in speed with each command using a scan tool.NOTE: A slight delay may occur before the cooling fan activates.
- The cooling fan does not activate or increase in speed
Refer to Circuit/System Testing
- The cooling fan activates and increases in speed
- The cooling fan does not activate or increase in speed
- All OK.