LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2015 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Rear Wheel Speed Sensor Replacement (Drum Brake) >> Removal Procedure

Removal Procedure

  1. Remove rear wheelhouse panel liner. Refer to Rear Wheelhouse Liner Replacement .
  2. Remove the rear brake hose from the wheel cylinder and the rear backing plate. Refer to Rear Brake Hose Replacement (Disc Brake) and Rear Brake Hose Replacement (Drum Brake)
  3. Remove the wheel speed sensor screw (2) from the steering knuckle.
    Fig 1: Wheel Speed Sensor And Wheel Speed Sensor Screw
    GM2028211Courtesy of GENERAL MOTORS COMPANY
  4. Remove wheel speed sensor (1).
  5. Remove wiring harness (3) from bracket (4).
  6. Disconnect the electrical connector (1).
    Fig 2: Wheel Speed Sensor Electrical Connector
    GM2028212Courtesy of GENERAL MOTORS COMPANY
  7. Remove wheel speed sensor from vehicle.
scientia non olet · About LEMON Manuals