Removal Procedure

Front Bumper Fascia Opening Lower Cover Replacement »Remove
Front Tire Front Air Deflector Replacement »Remove
Front Bumper Fascia Upper Bolt (1)»Remove [2x]

Fig 1: Identifying Front Bumper Fascia Upper Bolts And Front Bumper Fascia Upper Retainers
Courtesy of GENERAL MOTORS COMPANY
Remove the front bumper fascia upper retainers (2).
Front Wheelhouse Liner Bolt (1) »Remove [6x]

Fig 2: Identifying Front Wheelhouse Liner Bolts
Courtesy of GENERAL MOTORS COMPANY
Pull the front bumper fascia (1) carefully outward in order to release the retaining tabs from front bumper fascia guides.

Fig 3: Identifying Front Bumper Fascia
Courtesy of GENERAL MOTORS COMPANY

NOTE: Use a plastic trim tool if necessary. Use care when removing the fascia. Fascia might rip apart if forced.
Disconnect all electrical connectors.
Front Bumper Fascia (1) »Remove

Fig 4: Locating Front Bumper Fascia
Courtesy of GENERAL MOTORS COMPANY

NOTE: A second technician is required.
Transfer components as necessary.