Installation Procedure

Front Bumper Fascia (1) »Install

Fig 1: Locating Front Bumper Fascia
Courtesy of GENERAL MOTORS COMPANY

NOTE: A second technician is required.
Carefully push in the retaining tabs of front bumper fascia into the front bumper fascia guides.
Connect any electrical connectors.
Front Wheelhouse Liner Bolt (1)»Install and tighten 2.5 N.m (22 lb in) [6x]

Fig 2: Identifying Front Wheelhouse Liner Bolts
Courtesy of GENERAL MOTORS COMPANY

CAUTION: Refer to Fastener Caution .
Install the front bumper fascia upper retainers (2).

Fig 3: Identifying Front Bumper Fascia Upper Bolts And Front Bumper Fascia Upper Retainers
Courtesy of GENERAL MOTORS COMPANY
Front Bumper Fascia Upper Bolt (1) Install and tighten 9 N.m (80 lb in) [6x]
Front Tire Front Air Deflector Replacement »Install
Front Bumper Fascia Opening Lower Cover Replacement »Install