LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Malibu LS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.0L (LTG) Or 2.5L (LKW) - Repair Instructions - Off Vehicle >> Repair Instructions - Off Vehicle >> Engine Block Cleaning and Inspection >> Measuring Cylinder Bore Diameter

Measuring Cylinder Bore Diameter

    Fig 1: Measuring Cylinder Bore
    GM4972Courtesy of GENERAL MOTORS COMPANY
  1. Measure the cylinder bore diameter 35 mm (1.378 in) from the deck face using the EN-8087  gauge.
  2. Compare your results with the Engine Mechanical Specifications (LTG) , Engine Mechanical Specifications (LKW) , . If the cylinder diameter exceeds the specifications, the cylinder block may be oversized to 0.25 mm (0.010 in). There is only one size of oversized pistons and rings available for service. Refer to Cylinder Boring and Honing .
scientia non olet · About LEMON Manuals