Camshaft Cover and Components
Camshaft Cover and Components
| Callout | Component Name |
|---|---|
| Preliminary Procedure Ensure all sealing surfaces are clean and free of debris. Refer to Camshaft Cover Cleaning and Inspection (LTG) , Camshaft Cover Cleaning and Inspection (LKW) . |
|
| 1 | Camshaft Cover Gasket |
| 2 | Camshaft Cover |
| 3 | Camshaft Cover Bolt (Qty: 19)
NOTE:
Tighten the 19 camshaft cover perimeter bolts and the 4 interior camshaft cover bolts in sequence. |
| 4 | Camshaft Cover Bolt (Qty: 4)
CAUTION:
Refer to Fastener Caution .
NOTE:
Tighten the camshaft cover bolts in sequence. Tighten 10 (89 lb in) |
| 5 | Ignition Coil |
| 6 | Ignition Coil Bolt Tighten 10 (89 lb in) |
| 7 | Camshaft Cover Heat Shield |
| 8 | Camshaft Cover Heat Shield Bolts (Qty: 4) Tighten 10 (89 lb in) |
| 9 | Oil Level Indicator |
| 10 | PCV Hose Assembly |