Camshaft Cover - Right Side
Camshaft Cover - Right Side
| Callout | Component Name |
|---|---|
| Preliminary Procedure Thoroughly clean the camshaft cover and mating surfaces. Inspect each component, O-rings, and fasteners, and replace as necessary. |
|
| 1 | Camshaft Cover |
| 2 | Camshaft Position Actuator Control Solenoid Valve - Intake |
| 3 | PCV Valve |
| 4 | PCV Valve Bolt
CAUTION:
Refer to Fastener Caution . Tighten 10 N.m (89 lb in) |
| 5 | PCV Valve |
| 6 | PCV Valve Bolt Tighten 10 N.m (89 lb in) |
| 7 | PCV Tube Assembly
NOTE:
Component may vary by model. |
| 8 | Camshaft Cover Plug Tighten 35 N.m (26 lb ft) |