LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Malibu LS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.0L (LTG) Or 2.5L (LKW) - Repair Instructions - Off Vehicle >> Repair Instructions - Off Vehicle >> Balancer With Oil Pump Shaft Installation

Balancer With Oil Pump Shaft Installation

    Fig 1: Balancer And Oil Pump Shaft Assembly Bolts
    GM2742574Courtesy of GENERAL MOTORS COMPANY
  1. Install the balancer and oil pump shaft assembly (2).
  2. Install the balancer and oil pump shaft assembly bolts (1) finger tight.
  3. Fig 2: Balancer Bolt Tightening Sequence
    GM2743543Courtesy of GENERAL MOTORS COMPANY
  4. Tighten the bolts twice in sequence to 58 N.m (43 lb ft).