LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2014 >> Malibu LS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 2.0L (LTG) Or 2.5L (LKW) - Repair Instructions - Off Vehicle >> Repair Instructions - Off Vehicle >> Balancer With Oil Pump Shaft Cleaning and Inspection

Balancer With Oil Pump Shaft Cleaning and Inspection

Fig 1: Balancer With Oil Pump Shaft
GM2742597Courtesy of GENERAL MOTORS COMPANY
Balancer With Oil Pump Shaft Cleaning and Inspection

Callout Component Name

Preliminary Procedures

  1. Completely inspect the balancer with oil pump shaft assembly and components.
  2. Clean all mating surfaces.
  3. Inspect all threaded holes for damage.
  4. Inspect the oil pump screen assembly.
1 Oil Pump Assembly
2 Oil Pump Cover
3 Balancer Shaft Module
4 Oil Pump Locating Pin
5 Oil Pump Screen Assembly with Suction Pipe
scientia non olet · About LEMON Manuals