Rear Seat Back Cushion Removal and Installation (60% w/Split Back)

Fig 1: Rear Seat Back Cushion & Pivot Support (60% Side)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear seat cushion. Refer to Rear Seat Cushion Removal and Installation . Remove the rear seat back cushion bolster. Refer to Rear Seat Back Bolster Replacement
1	Rear Seat Back Cushion Pivot Support Procedure Pull the rear seat back cushion latch release located on the top of the rear seat back cushion, and fold the rear seat back cushion forward. Push in on the rear seat back cushion pivot support, and release from bracket.
2	Rear Seat Back Cushion Procedure Pull up on the outer side of the rear seat back cushion and remove the rear seat back cushion from the bracket and hinge. Transfer components as necessary.

Callout

Component Name

Preliminary Procedure

Remove the rear seat cushion. Refer to Rear Seat Cushion Removal and Installation .
Remove the rear seat back cushion bolster. Refer to Rear Seat Back Bolster Replacement

Rear Seat Back Cushion Pivot Support

Procedure

Pull the rear seat back cushion latch release located on the top of the rear seat back cushion, and fold the rear seat back cushion forward.
Push in on the rear seat back cushion pivot support, and release from bracket.

Rear Seat Back Cushion

Procedure

Pull up on the outer side of the rear seat back cushion and remove the rear seat back cushion from the bracket and hinge.
Transfer components as necessary.