Rear Seat Cushion Removal and Installation
Courtesy of GENERAL MOTORS COMPANY Rear Seat Cushion Removal and Installation
| Callout |
Component Name |
| 1 |
Rear Seat Procedure
- Release the rear seat center seat belts.
- Lift up on the front of the seat cushion at the latch locations to disengage the cushion retainers from the floor.
- Lift up on the rear of the seat cushion to disengage the cushion retainers from the floor.
- Disconnect electrical connector, if equipped with rear seat heater.
- Remove the rear seat cushion.
|