Driver or Passenger Seat Back Cushion Frame Replacement

Fig 1: Driver Or Passenger Seat Back Cushion Frame & Fasteners

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the front seat back cushion pad. Refer to Front Seat Back Pad Replacement . Remove the driver or passenger seat outer recliner finish cover. Refer to Driver or Passenger Seat Outer Recliner Finish Cover Replacement (Power) , Driver or Passenger Seat Outer Recliner Finish Cover Replacement (Manual) . Remove the driver or passenger seat inner recliner finish cover. Refer to Driver or Passenger Seat Inner Recliner Finish Cover Replacement . Remove the driver or passenger seat recliner actuator. Refer to Driver or Passenger Seat Recliner Actuator Replacement .
1	Driver or Passenger Seat Back Frame Fastener (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 35 N.m (26 lb ft)
2	Driver or Passenger Seat Back Cushion Frame Procedure Disconnect electrical connector, if equipped. If replacing with a new front seat back cushion frame, transfer components as necessary.

Callout

Component Name

Preliminary Procedures

Driver or Passenger Seat Back Frame Fastener (Qty: 4)

CAUTION:

Tighten
35 N.m (26 lb ft)

Driver or Passenger Seat Back Cushion Frame

Procedure

Disconnect electrical connector, if equipped.
If replacing with a new front seat back cushion frame, transfer components as necessary.