Rear Window Panel Trim Replacement (Without HP6)

Fig 1: Rear Window Panel Trim Assembly (Without HP6)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear seat back cushion bolster. Refer to Rear Seat Back Bolster Replacement . Remove the body side rear window garnish molding. Refer to Body Side Rear Window Garnish Molding Replacement .
1	Rear Window Panel Trim Fastener (Qty: 3) NOTE: There are two metal clips on the underside of the rear window panel that must be released from the shelf metal prior to removal of the panel from the vehicle. See view above for location.
2	Rear Window Panel Trim Assembly Procedure With the aid of an assistant, guide the rear window panel forward in the vehicle and upwards to clear the speaker system. When replacing the rear window panel trim assembly, transfer all necessary components. Ensure the rear window trim panel feet are seated into the rear window sheet metal drain shoe.

Callout

Component Name

Preliminary Procedure

Remove the rear seat back cushion bolster. Refer to Rear Seat Back Bolster Replacement .
Remove the body side rear window garnish molding. Refer to Body Side Rear Window Garnish Molding Replacement .

Rear Window Panel Trim Fastener (Qty: 3)

NOTE:

There are two metal clips on the underside of the rear window panel that must be released from the shelf metal prior to removal of the panel from the vehicle. See view above for location.

Rear Window Panel Trim Assembly

Procedure

With the aid of an assistant, guide the rear window panel forward in the vehicle and upwards to clear the speaker system.
When replacing the rear window panel trim assembly, transfer all necessary components.
Ensure the rear window trim panel feet are seated into the rear window sheet metal drain shoe.