Rear Window Wiper Motor Replacement
Courtesy of GENERAL MOTORS COMPANY Rear Window Wiper Motor Replacement
| Callout |
Component Name |
|
Preliminary Procedure
- Open and support the liftgate assembly.
- Remove the rear window wiper arm assembly. Refer to Rear Window Wiper Arm Replacement .
- Remove the rear liftgate lower trim finish panel. Refer to Liftgate Lower Trim Finish Panel Replacement
.
- Disconnect the rear window wiper motor electrical connector.
|
| 1 |
Rear Window Wiper Motor Bolt (Qty: 3)
Tighten
9 N.m (80 lb in) |
| 2 |
Rear Window Wiper Motor Procedure
- Pull the rear window wiper motor inward from the rear liftgate.
- Inspect the rear window wiper motor window grommet for damage. Replace if needed.
|