LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Trax LS, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim And Interior Paneling >> Repair Instructions >> Liftgate Lower Trim Finish Panel Replacement

Liftgate Lower Trim Finish Panel Replacement

Fig 1: Liftgate Lower Trim Finish Panel
GM2788708Courtesy of GENERAL MOTORS COMPANY
Liftgate Lower Trim Finish Panel Replacement

Callout Component Name
Preliminary Procedure 
Remove the liftgate upper side trim finish panel. Refer to Liftgate Upper Side Trim Finish Panel Replacement .
1 Liftgate Inside Pull Handle
Procedure 
Squeeze and pull the inside handle to disengage from liftgate trim finish panel.
2 Liftgate Lower Trim Finish Panel Assembly

Procedure

  1. Use a trim panel removal tool to aid in the removal of the trim panel from the liftgate assembly.
  2. Start at the top clip on the right-hand side of liftgate lower trim finish panel.
  3. Disconnect the electrical connector, if equipped.
scientia non olet · About LEMON Manuals