LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Impala LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 494 (Engine Mechanical - 2.8L Or 3.0L - Repair Instructions - On Vehicle (2 Of 2)) >> Engine Oil Cooler Shield Replacement

Engine Oil Cooler Shield Replacement

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Engine Oil Cooler Shield
GM2265439Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the oil filter adapter and oil cooler assembly. Refer to Oil Filter Upper End Plate Replacement .
1 Engine Oil Cooler Shield Fastener (Qty: 5)
CAUTION: Refer to Fastener Caution .

Tighten:  9 N.m (80 lb in)
2 Engine Oil Cooler Shield
Procedure: 
Transfer components as necessary.
scientia non olet · About LEMON Manuals