LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Impala LTZ >> Repair and Diagnosis >> External Pages >> Different car >> Section 494 (Engine Mechanical - 2.8L Or 3.0L - Repair Instructions - On Vehicle (2 Of 2)) >> Engine Oil Cooler Replacement

Engine Oil Cooler Replacement

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Engine Oil Cooler
GM2265554Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the engine oil cooler shield. Refer to Engine Oil Cooler Shield Replacement .
1 Engine Oil Cooler Fastener (Qty: 6)
CAUTION: Refer to Fastener Caution .

Tighten:  12 N.m (106 lb in)
2 Engine Oil Cooler

Procedure

  1. Discard the gasket. Do NOT reuse.
  2. Transfer components as necessary.
scientia non olet · About LEMON Manuals