Drive Belt Replacement

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Drive Belt Routing

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures: Remove the engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side
1	Drive Belt Procedure Rotate the drive belt tensioner clockwise to release the drive belt tension Slide the drive belt off of the belt idler pulley. Slowly release the drive belt tensioner.

Callout

Component Name

Preliminary Procedures:
Remove the engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side

Drive Belt

Procedure

Rotate the drive belt tensioner clockwise to release the drive belt tension
Slide the drive belt off of the belt idler pulley.
Slowly release the drive belt tensioner.