LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Cruze LT, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Engine Mechanical - 1.4L (LDD, LDU, LUH, Or LUJ) - Repair Instructions - Off Vehicle (2 Of 2)) >> Positive Crankcase Ventilation Pipe Installation

Positive Crankcase Ventilation Pipe Installation

WARNING: This page is about a different car, the 2011 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Turbocharger, Positive Crankcase Ventilation Pipe Assembly And Charger Air Bypass Valve Pipe
    GM2190426Courtesy of GENERAL MOTORS CORP.
  1. Install the positive crankcase ventilation pipe assembly (1) to the camshaft cover retainer clips.
  2. Connect the positive crankcase ventilation pipe to turbocharger (3).
  3. Install the charger air bypass valve pipe (2) to turbo charger waste regulator solenoid valve.
  4. Install the charger air bypass valve pipe to turbocharger.
  5. Fasten the charger air bypass valve pipe clamp (4).
    6. Fig 2: Positive Crankcase Ventilation Pipe Retainer Clips And Retainer Clamp
    GM2190425Courtesy of GENERAL MOTORS CORP.
  6. Install the positive crankcase ventilation pipe to the intake manifold and fix with retainer clamp (1).
  7. Clip in the positive crankcase ventilation pipe to the 2 retainer clips (2) and (3).
scientia non olet · About LEMON Manuals